Blog

ABS edge banding strips are manufactured using Acrylonitrile-Butadiene-Styrene (ABS) copolymer as the primary raw material, formed through an extrusio

The primary distinction between laser edge banding and standard edge banding lies in the difference in the edging technology employed. Standard edge b

Key parameters include hardness (Shore A 30–80), tensile strength (≥5 MPa), and tear strength (≥15 kN/m). The selection of hardness requires balancing

T-shaped sealing strips—also referred to as profiled silicone strips or silicone extrusion strips for mechanical and electrical equipment—are custom-e

Tackifiers exert a wetting effect on the substrates to be bonded; under specific conditions of temperature, pressure, and time, they facilitate surfac

Compared to materials such as metal and acrylic, PVC furniture edging strips are remarkably lightweight. This characteristic is not merely a consequen

The manufacturing process for PVC edge banding involves first printing ink onto a PVC substrate, followed by roller-coating with UV varnish for curing

PVC edge banding is an edging material manufactured using polyvinyl chloride as the primary raw material, combined with appropriate additives, and pro

During the edge banding process, the temperature of the hot-melt adhesive, the substrate, and the edge banding material—as well as the ambient tempera

The primary components of hot-melt adhesives used for furniture edge banding are thermoplastic resins or elastomers; these constituents endow the adhe

If the edge banding machine is to remain idle for more than two hours, the temperature of the glue tank should be lowered to approximately 100°C. On o

Water and Moisture Resistance: Hot-melt adhesive edge banding is manufactured using high-quality, eco-friendly materials, offering excellent resistanc